← Back to Project mkstick

Project mkstick

How to use Project mkstick to put a Windows or Linux installer on a USB stick from Chrome or Edge.

Project mkstick puts a Windows or Linux installer on a USB stick from a web page. You choose the system, plug in a stick and press a button. It does the job of Rufus, and it works the same on Windows, Mac and Linux because it runs in the browser.

These pages walk through every step. If you want to get going straight away, start with the first one.

Before you begin#

You need three things.

  • Chrome or Edge on a computer. Safari, Firefox and phones cannot save files to a drive, so they cannot do this job.
  • A USB stick of 8 GB or more, in FAT32 format. For Windows 11, 16 GB is safer. The stick is wiped when you format it, so copy off anything you want to keep.
  • The PC you want to install on must start with UEFI. That covers nearly every PC made since 2012.
Keep the page open Once the write starts, let it finish. Do not refresh the page, close the tab or unplug the stick. Leaving too early leaves a stick that will not start.
Open Project mkstick
  • Make your first stick

    The four steps on the page, from choosing a system to a finished stick.

  • Windows 11 and 10

    How to get the Windows installer and what the language and version choices mean.

  • Ubuntu and Debian

    Put Ubuntu Desktop, Ubuntu Server or Debian on a stick, with the checksum checked for you.

  • Use an ISO you already have

    Choose a Windows or Linux ISO from your computer. It is read on your computer and never uploaded.

  • Format the stick

    Wipe the stick and set it to FAT32 on Windows, Mac or Linux. Needed if the page says the stick is not empty.

  • Start a PC from the stick

    How to open the boot menu and install.

  • Troubleshooting

    What each message on the page means and what to do about it.

  • Questions

    Quick answers about cost, privacy and what Project mkstick can and cannot do.